1.Full digital control technique
2.Intelligent detecting and monitoring function
3.Digital control static switch and zero changeover time
4.Full isolation between input and output
5.DC panel and utility power are full isolated.
6.Uses electric power standard cabinet.
It's provided with over voltage protection, under voltage protection, over current protection, short circuit protection and some other protection functions.
Large LCD can display the input voltage, output voltage, current, frequency, battery voltage, charge-discharge current value, fault and other running conditions in Chinese and English.
At most 256 pieces of historic records can be showed. This makes it easier for users to analyze the power supply condition.
The static state bypass has strong anti-overload capacity.
Chemical factories, Power generating plants, Power distribution stations, electrical substations, electric power communication systems, and many other fields.
|Rated voltage||380/400/415 Vac three-phase|
|Current harmonic distortion||<5%with harmonic filter|
|Soft Start||0-100% in 10″|
|Rated voltage||220/230/240 Vac single-phase|
|Permitted voltage range||±15%(selectable from ±10% to±25% from front panel)|
|Permitted frequency range||±2%(selectable from ±1% to 5% from front panel)|
|Standard features||BackFeed portection;split bypass line|
|Type||Maintenance-free lead-acid VRLA AGM/GEL;NICd|
|Maximum recharge current(A)||0.2 X C10|
|AC ripple voltage||<1%|
|Number of phases||1|
|Rated voltage(V)||230Vac single-phase|
|Regulation of the output voltage||220~244Vac phase/neutral(from control panel)|
|Overload||110% 125% 150% of the rated current for 5h/10’/1′|
|Frequency stability||±0.05% on mains failure|
|Remote signaling||Volt free contacts|
|Remote controls||EPO and Bypass|
|Relative humidity||<95% non condensing|
|Colour||Light grey (RAL7035)|
|Noise||65dBA at 1m|
|Efficiency Smart Mode||up to 98%|
|Compliance||Safty: EN 62040-1-1(Directive 2006/95/EC);EMC:6200-2(Directive 2004/108/EC)|