RS485 And RS232 Communication Lithium Iron Battery Pack 48V 50AH
Techinical Specification:
Cell | model | CNB4850 | |
Capacity(0.5C) | 50Ah | ||
Rated voltage | 3.2V | ||
Typical Impedance (mΩ) | ≤1 mΩ | ||
Battery material | lithium iron phosphate | ||
PACK | Combination method | 1P16S | |
Minimal capacity(0.5C) | 50Ah | ||
Nominal voltage | 51.2V | ||
Max. charge voltage | 58.2V | ||
Discharge cut‐off voltage | 40V | ||
Max Charge current | (0.5C)25A | ||
Max Working current | (1C)50A | ||
Standard charge current | (0.2C)10A | ||
Standard charge current | (0.5C)25A | ||
Pack Impedance standard | ≤100 mΩ | ||
Weight (Approx.) | ≈32Kg | ||
Max. dimension(L×W×H)(mm) | ≤420*482*133 | ||
Operating temperature | Charge temperature | 0℃~45℃ | |
Discharge temperature | ‐20℃~55℃ | ||
Battery Management System | Single cell over‐charge cut‐off voltage | 3.7V | |
Over‐charge release voltage | 3.35V | ||
Single cell under‐discharge cut‐off voltage | 2.5V | ||
Discharge release voltage | 2.7V | ||
Over‐discharge cut‐off current | 35A | ||
Over‐discharge cut‐off current delay | 1S±0.5S | ||
Short‐circuit protection | 80A | ||
Short‐circuit protection delay | ≤1mS | ||
Condition for the recovery of over‐current and Short‐circuit | Charge to remove | ||
Balance current | 50mA | ||
Balance Condition | ≥3.5V, differential pressure 50mV | ||
Communication | RS485,RS232 |
Remarks:
The battery bank in the description is suitable for power products of back up.
Package and delivery
Certification