Electricity UPS System Special Cabinet Electricity UPS 10-100KVA
Petroleum, chemical industry, gas and power station and so on.
It adopts microprocessor bus control technology, three core processor controlling rectification, inversion and parallel connection respectively, to ensure the real-time control of the rectifier, inverter and static switch and the coordination of every power part, characterized by increased control of aging, higher reliability, enhance of the efficiency of the whole UPS system and the output technical parameters are better than that of the device with same capacity.
6 pulse or 12 pulse fully controlled bridge (6 or 12 SCR) compose rectifier. Its function is to input AC 3880V to DC220V or so by rectification. “slope” start (soft start) is the control feature, which means output voltage of the rectifier increase from 0V to 220V within 10 second and has no impact on the power grid.
SPWM(sinusoidal pulse width modulation) , formed by 6 IBGT high power tubes, is composed of full-bridge-control.
Large Capacity of Overload of the UPS Inverter
110% load --60＇
125% load --10＇
150% load --1＇
200% single phase load --30＂
Good Capacity of Resistance to Output Short Circuit Current Limiting and Period Load Impact
|Rating voltage||220V(one-phase) /380V(three phase)|
|Soft start||0-100% in 5”|
|Power factor||0.95(with input filter)|
|Permitted voltage range||±15%|
|Voltage accuracy||220V±1%(steady load) 220V±3%( fluctuating load)|
|Permitted Frequency range||50/60Hz±0.05Hz(powered by battery)|
|THD||Linearload<2%, non linear load<4%|
|Current crest ratio||3:1|
|Overload capacity||Normal in 110% load, 125% for 10min|
|Efficiency||Double switch:94%, ECO:98%|
|Maximum discharge current||36A||55A||73A||109A||145A||181A||218A||291A||364A|
|LCD||Chinese/English UPS status, operation instruction input voltage, output voltage, current, frequency, battery voltage, value of charge and discharge current, accident display, warning|
|Storage temperature||-25 ºC—55 ºC|