LCD Display 10-100KVA Hospital Online Ups Three Phase 230VAC

Single Phase Solar Power Inverter High Reliability Low Power Consumption

CNS112 series Pure Sine Wave Inverter Charger 1000W-6000W, LED/LCD digital display, 3times peak power, low frequency type with transformer, UPS function.

Main Features:
1. LED/LCD digital display show voltage, load and battery info in real time.
2. Peak power is three times of rated power.
3. Can work with inductive load such as air conditioner, motor door and so on.
4. Phase & waveform: Single phase & Pure Sine Wave (bypass mode sync to input) output, available for sensitive load.
5. 4-step progressive charging, 7 battery type selector.
6. Fast and powerful charger with 35A and 75A/90A.
7. Accept generator's energy output.
8. High power factor 0.9, low power consumption.
9. Automatically transfer between battery and line modes.
10. Microprocessor control guarantees high reliability.
11. Bypass without battery connected.
12. Remote control function.
13. Protection against: Over load, over temperature, over charging, low battery
14. Reverse connection (optional by hard connector), Blackouts

Aplication:

wind generator;

Solar power system;

house;

vehicle, ship;

navigation and places where lack of city power

mobile electricity work and telecommunications device

launch Station.

System parameter:

• Battery Mode Efficiency >85%; Line Mode Efficiency >96%
• Power Saver: Load <=25W (Enabled on "P/S auto" setting of Remote control)
• Audible Alarm: Sounding when the heat sink's tem is over 100ºC and shutdown after 30 seconds.
• Over Load Protection:  110% <load<150%, beeps 0.5s every 1s, and Fault after 60s; Load>150%, beeps 0.5s every 1s, and Fault after 20s.
• Protections: low battery,over charging,over temp,over load
• Communications: RS-232/USB/SNMP(custom-made)
• Operating Environment 0-40ºC,0-90% RH(non-condensing)
• Audible Noise <60dB

Technical specifications: