CNG310 Series Low Frequency Online UPS 10-100KVA
Nominal Input Voltage: 380/400/415VAC
Output Power Factor:0.8
Technical parameter of CNG310 series:
|Model power||CNG310 10KVA|
|Capacity||8KW||12 KW||16 KW||24 KW||32 KW||48 KW||64 KW||80 KW|
|Rated Voltage||80-300 Vac three-phase|
|Power Factor||>0.92with harmonic filter|
|Current Harmonic Distortion||<5%with harmonic filter|
|Soft Start||0-100% in10"|
|Rated Voltage||230Vac single-phase|
|Permitted Voltage Range||±15%(selectable from ±10% to ±25% from front panel)|
|Permitted Frequency Range||±2%(selectable from ±1% to ±5% from front panel)|
|Standard Features||BackFeed protection; split bypass line|
|Type||Maintenance-free lead-acid VRLA AGM / GEL;NICd|
|Maximum Recharge Current(A)||0.2 X C10|
|AC Ripple Voltage||<1%|
|Number of Phases||1|
|Rated Voltage(V)||48Vac single-phase|
|Regulation of the Output Voltage||48Vac phase/neutral(from control panel)|
|Overload||110% 125% 150% of the rated current for 5h/10'/1'|
|Frequency Stability||±0.05% on mains failure|
|Remote Signaling||Volt free contacts|
|Remote Controls||EPO and Bypass|
|Communication||RS232 + remote contacts|
|Operation Temperature||0ºC/ + 40ºC|
|Relative Humidity||<95% non condensing|
|Color||Light gray (RAL 7035)|
|Noise||54dBA at 1m||60dBA at 1m||65dBA at 1m|
|Efficiency Smart Mode||up to 98%|
|Compliance||Safety:EN 62040-1-1(Directive 2006/95/EC); EMC:6200-2(Directive 2004/108/EC)|
Local area Network(LAN),
High intelligence and reliable power supply:
CNG310 provides maximum protection for vital mission-critical networks, security applications (electro- medical)and industrial applications thanks to its outstanding mechanical and electrical design.
The load is powered continuously by the inverter with a filtered, stabilized and regulated sine wave supply. The input and output EMI filters considerably increase the immunity of the load to mains disturbances and surges.
The CNG310 uses on-line double conversion technology (VFI) with isolation transformer on the inverter output.
The CNG310 is supplied with Watch & Save 3000 software as standard and can be remotely monitored
using the Power Net Guard system from anywhere in the world. Additional battery extension packs allow the standard battery run time to be extended up to several hours.
Minimum impact on suppliers easy source:
Input current distortion <4% for the CNG310 with filter with sinusoidal absorption to remove the risk of resonance with other input supply users or phase shift capacitor sets. The absorbed current distortion is independent of input supply parameters such as impedance. This enable CNG310 to deliver maximum performance levels regardless of the installation environment. With these input features CNG310 can achieve significant savings in terms of sizing and power supply courcesiso-ation transformers and generators over less sophisticated power systems.
Maximum battery care:
Battery deep discharge protection;
Temperature compensating charger;
Built-in automatic and manual battery test feature.
Extremely high short-circuit current to ensure compatibility with the most difficult transformer applications (lighting,drives and industrial processes) and an isolation transformer on the inverter output;
Full microprocessor control with no-break static and manual bypasses;
0.8 power factor make CNG310 suitable for powering ICT and Industrial loads;
High level diagnostics: event log with 128 messages, states,measurements and alarms - available from the built-in LCD with several languages;