|Place of Origin:||Shenzhen, China|
|Certification:||CE, ISO9001, ISO14001|
|Minimum Order Quantity:||1|
|Packaging Details:||Export Standard Package|
|Delivery Time:||15-20days after receiving the deposit|
|Payment Terms:||T/T, L/C, Western Union|
|Supply Ability:||1000pcs per year|
Electricity Industrial UPS Uninterrupted Power Supply High Power 10 - 100KVA
Model: 10-100 KVA
Nominal voltage: 380/400/415VAC
Nominal frequency: 50Hz/60Hz
Output power factor: 0.8
Petroleum, chemical industry, gas and power station and so on.
|Rating voltage||220V(one-phase) /380V(three phase)|
|Soft start||0-100% in 5”|
|Power factor||0.95(with input filter)|
|Permitted voltage range||±15%|
|Voltage accuracy||220V±1%(steady load) 220V±3%( fluctuating load)|
|Permitted Frequency range||50/60Hz±0.05Hz(powered by battery)|
|THD||Linearload<2%, non linear load<4%|
|Current crest ratio||3:1|
|Overload capacity||Normal in 110% load, 125% for 10min|
|Efficiency||Double switch:94%, ECO:98%|
|Maximum discharge current||36A||55A||73A||109A||145A||181A||218A||291A||364A|
|LCD||Chinese/English UPS status, operation instruction input voltage, output voltage, current, frequency, battery voltage, value of charge and discharge current, accident display, warning|
|Storage temperature||-25 ºC—55 ºC|
It adopts microprocessor bus control technology, three core processor controlling rectification, inversion and parallel connection respectively, to ensure the real-time control of the rectifier, inverter and static switch and the coordination of every power part, characterized by increased control of aging, higher reliability, enhance of the efficiency of the whole UPS system and the output technical parameters are better than that of the device with same capacity.
6 pulse or 12 pulse fully controlled bridge (6 or 12 SCR) compose rectifier. Its function is to input AC 3880V to DC220V or so by rectification. “slope” start (soft start) is the control feature, which means output voltage of the rectifier increase from 0V to 220V within 10 second and has no impact on the power grid.
SPWM(sinusoidal pulse width modulation) , formed by 6 IBGT high power tubes, is composed of full-bridge-control. Its function is to transform DC voltage into sinusoidal AC voltage, boosting by the special (△/Y) zero phase shift zigzag type isolation transformer and become AC220V as load required. In addition, the transformer can eliminate like triple harmonics current that are reflected by non linear load from computer. Control features is the adoption of the “slow-down gate voltage” protection technology, greatly reducing disturbance of shutoff of the inverter (inverter and static switch shift mutually ), enhancing the overload capacity of the whole UPS system, which make the capability of anti-short circuit and anti overload of UPS far superior to the ordinary UPS, especially the anti shot circuit is unmatched by similar devices.
Large Capacity of Overload of the UPS Inverter
110% load --60＇
125% load --10＇
150% load --1＇
200% single phase load --30＂
Good Capacity of Resistance to Output Short Circuit Current Limiting and Period Load Impact
290% rated current -- 5＂: Even though a output short circuit or an overload occurs because of user’s improper operation, the output current of UPS can still be limited to a controllable extent instead of exceedingly increasing, consequently laying a good foundation for a long-term and reliable operation of UPS.
Not sync automatically switch:
Optional bypass cabinet:
Isolating transformer and the bypass voltage regulation
Working status and data of UPS are transmitted to DCS system in real-time via RS232/RS485, passive contact and power transmitter, which finally realize Intelligent monitoring.
|Norminal Voltage:||220VAC Single Phase (6-20KVA)/ 380VAC Three Phase||Output Power Factor:||0.8|
|OutputVoltage Accuracy:||220V±1%(steady Load) 220V±3%( Fluctuating Load)||THD:||Linearload<2%, Non Linear Load<4%|
|Dynamic Transients:||<5%||Overload Capacity:||Normal In 110% Load, 125% For 10min|
|Efficiency:||Double Switch:94%, ECO:98%|