All-in-one solar charge inverter
overview:
CNS series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; and two output modes are available, i.e. Inverter and Mains, to meet different application requirements.
The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the maximum energy of the solar panel in real time.It is ideal for AC loads such as household appliances, power tools, industrial equipment, and electronic audio and video equipment.
parameter:
Models | CNS4830S60 | CNS4840S60 | CNS4850S80 | CNS4825U60 | CNS4830U60 | CNS4835U80 | ||
AC mode | ||||||||
Rated input voltage | 220/230Vac | 110/120Vac | ||||||
Input voltage range |
(170Vac~280Vac) ±2% (90Vac-280Vac) ±2% |
(90Vac~140Vac) ±2% | ||||||
Frequency | 50Hz/ 60Hz (Auto detection) | |||||||
Frequency Range |
47±0.3Hz ~ 55±0.3Hz (50Hz); 57±0.3Hz ~ 65±0.3Hz (60Hz); |
|||||||
Overload/short circuit protection | Circuit breaker | |||||||
Efficiency | >95% | |||||||
Conversion time (bypass and inverter) | 10ms (typical) | |||||||
AC reverse protection | Available | |||||||
Maximum bypass overload current | 40A | |||||||
Inverter mode | ||||||||
Output voltage waveform | Pure sine wave | |||||||
Rated output power (VA) | 3000 | 4000 | 5000 | 2500 | 3000 | 3500 | ||
Rated output power (W) | 3000 | 4000 | 5000 | 2500 | 3000 | 3500 | ||
Power factor | 1 | |||||||
Rated output voltage (Vac) | 230Vac | 120Vac | ||||||
Output voltage error | ±5% | |||||||
Output frequency range (Hz) |
50Hz ± 0.3Hz 60Hz ± 0.3Hz |
|||||||
Efficiency | >90% | |||||||
Overload protection
|
(102% < load <125%) ±10%: report error and turn off the output after 5 minutes; (125% < load < 150%) ± 10%: report error and turn off the output after 10 seconds; Load >150% ±10%: report error and turn off the output after 5 seconds; |
(102% < load <110%) ±10%: report error and turn off the output after 5 minutes; (110% < load < 125%) ± 10%: report error and turn off the output after 10 seconds; (Load >150% ±10%): report error and turn off the output after 5 seconds; |
||||||
Peak power | 6000VA | 8000VA | 10000VA | 5000VA | 6000VA | 7000VA | ||
Loaded motor capability
|
2HP | 3HP | 4HP | 1HP | 1HP | 2HP | ||
Output short circuit protection | Circuit breaker | |||||||
Bypass breaker specifications | 40A | |||||||
Rated battery input voltage | 48V (Minimum starting voltage 44V) | |||||||
Battery voltage range | Undervoltage alarm/shutdown voltage/overvoltage alarm /overvoltage recovery... settable on LCD screen) | |||||||
Power saving mode | Load ≤25W | |||||||
AC charging | ||||||||
Battery type | Lead acid or lithium battery | |||||||
Maximum charge current | 60A | 30A | ||||||
Charge current error | ± 5Adc | |||||||
Charge voltage range | 40 –58Vdc | 40 –60Vdc | ||||||
Short circuit protection | Circuit breaker and blown fuse | |||||||
Circuit breaker specifications | 40A | |||||||
Overcharge protection | Alarm and turn off charging after 1 minute | |||||||
PV charging | ||||||||
Maximum PV open circuit voltage | 145Vdc | |||||||
PV operating voltage range | 60-145Vdc | |||||||
MPPT voltage range | 60-115Vdc | |||||||
Battery voltage range | 40-60Vdc | |||||||
Maximum output power | 3200W | 4200W | 3200W | 4200W | ||||
PV charging current range (can be set) | 0-60A | 0-80A | 0-60A | 0-80A | ||||
Charging short circuit protection | Blown fuse | |||||||
Wiring protection | Reverse polarity protection | |||||||
Certified specifications | ||||||||
Certification | CE(EN62040-1) | |||||||
EMC certification level | EN62040-2, C2 | |||||||
Operating temperature range | -15°C to 55°C | |||||||
Storage temperature range | -25°C ~ 60°C | |||||||
Humidity range | 5% to 95% (Conformal coating protection) | |||||||
Noise | ≤60dB | |||||||
Heat dissipation | Forced air cooling, variable speed of fan | |||||||
Communication interface | USB/RS485(Bluetooth/WiFi/GPRS)/Dry node control | |||||||
Size (L*W*D) | 430mm*338mm*126mm | |||||||
Weight (kg) | 11 |
Features:
All-in-one solar charge inverter: The energy conversion unit of the whole system.
Specific system wiring method depends on the actual application scenario.