Single phase smart gird interactive inverter
Application:
Technical Specifications:
Model | SGS-10Si | SGS-15Si | SGS-20Si | SGS-25Si | SGS-30Si | SGS-35Si | SGS-50Si | |
SMART GRID SYSTEM | Appilcation | Smart Drid System for Mini Plant | ||||||
Control&Technology | Smart DSP Control Double Conversion IGBT Technology | |||||||
HYBRID SYSTEM | Inverter | 10kw | 15kw | 20kw | 25KW | 30kw | 35kw | 50kw |
Battery Storage | 100-200Ah | 150-300Ah |
200-400Ah 20-25kwp |
250-500aH | 300-600Ah | 350-750Ah | 450-900Ah | |
PV System |
10-12 kwp |
15-17kwp |
20-25 kwp |
25-30kwp |
30-35 kwp |
35-40 kwp |
45-50 kwp |
|
Generation | 10kw | 15kw | 20kw | 25kw | 30kw | 35kw | 50kw | |
Electrical Grid |
10kw /45A |
15kw /68A |
20kw /90A |
25kw-115A |
30kw /136A |
35kw /160A |
50kw /227A |
|
BATTERY VOLTAGE | Normal Voltage | 240 vdc | ||||||
Voltage Range | 210-290 vdc | |||||||
Max AC Charming Current | 40A | 60A | 75A | 90A | 112A | 130A | 200A | |
Maximum Battery current | 42A | 63A | 85A | 105A | 125A | 145A | 210A | |
IGBT CHARGER/RECTIFIER | Voltage Charge | 20Adc | 30Adc | 40Adc | 50Adc | 60Adc | 75Adc | 100Adc |
Charging Current(MAX) | 40kw | 15kw | 20kw | 25kw | 30kw | 35kw | 50kw | |
AC INPUT GRID LINE GENERATOR | Generator Power | 10kw | 15kw | 20kw | 25ke | 30kw | 35kw | 50kw |
Voltage | L-N:220/230/240 Vac+/-10% | |||||||
Phase | 1Phase 2WIRE + PE | |||||||
Frequency | 50/60 Hz±3% | |||||||
Function start/stop | Relay dry contact 10A(ACC on and start) | |||||||
Power Continuous(PF=1) | 10kw | 15kw | 20kw | 25kw | 30kw | 35kw | 50kw | |
AC OUTPUT | Output Voltage | L-N:220/230/240 Vac 1Phase 2Wire + PE | ||||||
Voltage Regulation | +/-5% steady load .<4% step load within 0.1sec | |||||||
Frequency | 50/60Hz Hz ± 0.1% | |||||||
Total Harmonic Distortion | THD<3%(linear load) | |||||||
Wave form | Pure sine wave | |||||||
Overload Capability | >125% load for 10 min,150% load for 10sec,200% load at 2sec | |||||||
Isolation | Type | Galvanic isolation | ||||||
EFFICIENCY | Inverter Peak(MAX) | >94% | ||||||
PROTECTION | System | Over current,Overload,Over tempeerature,Short circuit,Over voltage,Low battery and Over battery voltage | ||||||
IP Level | IP20 | |||||||
INDICATOR | HMI 7 inch Display | AC,Inverter,overload and Fault Output power ,ACEnergy Hour,today,Month,Year,AC Energy ACC,Battery voltage,Load,Dccurrent,inverter status and Fault | ||||||
ALARM | Operation Alarm | Low battery ,Overload,Over temperature and fault | ||||||
COOLING | System Operate | Automatic cooling fans | ||||||
ENVIRONMENT | Temperature | 0-45℃ | ||||||
Relative Humidity | 0-95%(Non-condensing) | |||||||
DESIGN REGULATION PHYSICAL | Tested According to | AS/NC 3100,EN61000-6-1/-3,EN50178 and IEC 62040 | ||||||
Dimension WxDxH(mm) | 550*890*1550(with SPC250-64) | |||||||
Weight(kg) | 200 | 250 | 250 | 250 | 300 | 550 | 600 |