LCD Display 3 Phase Rack Mount Uninterrupted Power System UPS 10-40KVA With Power Factor 0.9
Technical Parameter:
| Capacity | 20KVA, 30KVA, 40KVA | ||
| Input | |||
| Input way | 3 phases 4 wires + grounding | ||
| Rated Voltage | 380/400/415VAC | ||
| Voltage Range | 207~476VAC | ||
| Frequency Range | 40~70Hz | ||
| Power Factor | ≥0.99 | ||
| Bypass range |
Highest voltage of bypass protection:+15%(+5%,+10%,+25% are adjustable) Lowest voltage of bypass protection:-45%( -20%,-30% are adjustable) Frequency range:±10% |
||
| ECO range | Same as above | ||
| Input current harmonics | ≤3 (100％ non-linear load) | ||
| Output | |||
| Output way | 3 phases 4 wires + grounding | ||
| Rated Voltage | 380/400/415VAC | ||
| Power Factor | 0.9 | ||
| Voltage accuracy | ±1% | ||
| Output frequency | AC Mode | Synchronize with the input；when the city power frequency over the maximum range of ±10%(±1%,±2%,±4%,±5% are adjustable),the output frequency is 50×(±0.2)Hz | |
| Battery Mode | (50±0.2)Hz | ||
| Waveform distortion | Linear load | ≤2% | |
| Non-Linear | ≤5% | ||
| Load crest factor | 3:1 | ||
| Transfer time | AC mode turn to bypass mode: 0ms(tracking) | ||
| AC mode turn to battery mode: 0ms ; | |||
| Overload ability | Load ≤110%,60min,≤125%,continue working 10min,≤150% continue working 1min,≥150% shut off immediately | ||
| Efficiency | |||
| Overall efficiency | ECO mode ≥98%；Normal Mode ≥92% | ||
| Battery | |||
| Battery Voltage |
±192V±204V±216V±228V±240V DC (16 pieces,17 pieces,18 pieces,19 pieces,20 pieces all are adjustable) |
||
| Charge current | Maximum 6A(available to set against the different battery capacity) | ||
| Communication | RS232,RS485,SNMP card | ||
| Working environments | |||
| Working temperateure | 0℃～40℃ | ||
| Relative humidity | 0～95% no condensation | ||
| Storage temperature | -25℃～55℃(Not including the battery) | ||
| Altitude | Less than 1500 meter | ||
| Physical characteristics | |||
|
Weight (N.W.)Kg |
Power Module | 33.5 | |
|
Body size (W×H×D)mm |
Power Module | 443 x 131 x 580 mm | |
| Standard | CE,EN/IEC 62040-2,EN/IEC 62040-1-1,YD/T1095-2008 | ||
Our products are sold all over the world, you can rest assured.
