Pure Sine Wave Inverter Telecom Power Supply 48V 50A With Built - in MPPT
Key Features:
The solar integrated telecom power system system solution is equiped with pure sine wave inverter, built-in MPPT solar charge controller, built-in battery(optinal). The protection degree is IP55, protecting the device in poor environment greatly. Configurable input voltage range for home appliances and personal computers via LCD setting.
Specification:
| CNW48200 Solar System |
Rectifier Module(1-4) MPPT Solar Charge Controller (1-6) |
| MPPT Solar Charge Controller | |
| INPUT | |
| MPPT Range @Operating Voltage | 60 ~115VDC |
| Maximum PV Array Open Circuit Voltage | 145VDC |
| Maximum PV Array Power | 3200W |
| Maximum Input Current | 50A |
| OUTPUT | |
| Nominal Battery Voltage | 48VDC |
| Maximum Charge Current | 50A |
| Maximum Efficiency | 98% |
| Charging Method | Three stages: bulk, absorption and floating |
| PROTECTION | |
| Overload Protection | > 110% : audible alarm |
| Overcharge Protection | Yes |
| Polarity Reversal Protection @Solar Cell & Battery | Yes |
| INDICATORS | |
| LCD Panel | LCD panel indicating solar power, load level, battery voltage/capacity, charging current, and fault conditions |
| LED Display | Three indicators for solar, charging, and load status |
| Rectifier Module | |
| Rated input voltage | 220V |
| AC input Voltage range AC | 90-290V |
| AC input Frequency range | 45-65HZ |
| Power factor | ≥0.99 |
| Efficiency | >92% |
| Rated output voltage | 48V |
| Rated output current | 0-50A |
| Voltage range | 42-58V |
| ENVIRONMENT | |
| Humidity | 0 ~ 100% RH (No condensing) |
| Operating Temperature | -20°C to 55°C |
| Storage Temperature | -40°C to 75°C |
| Altitude | 0 ~ 3000 m |
![]()