Communication Custom - made Solar Power Inverter Pure Sine Wave 1000W - 6000W
Product Description:
CNS112 series Pure Sine Wave Inverter Charger 1000W-6000W, LED/LCD digital display, 3times peak power, low frequency type with transformer, UPS function. It widely applied in wind generator, Solar power system, house, vehicle, ship, navigation and places where lack of city power, mobile electricity work and telecommunications device, launch Station.
Technical specifications:
| MODEL | CNS112-1KW | CNS112-1.5KW | CNS112-2KW | CNS112-3KW | CNS112-4KW | CNS112-5KW | CNS112-6KW | ||||
| Nominal Power | 1000W | 1500W | 2000W | 3000W | 4000W | 5000W | 6000W | ||||
| AC Input | |||||||||||
| Phase & waveform |
Single phase & Pure Sine Wave | ||||||||||
| Voltage | 110/120/130VAC or 220/230/240VAC | ||||||||||
| Acceptable Voltage | 95-126VAC or 194-253VAC±4% | ||||||||||
| Low Line Disconnect | 85VAC±4% or 184VAC±4% | ||||||||||
| Low Line Re-connect | 95VAC±4% or 194VAC±4% | ||||||||||
| High Line Disconnect | 136VAC±4% or 263VAC±4% | ||||||||||
| High Line Re-connect | 126VAC±4% or 253VAC±4% | ||||||||||
| Frequency | 50Hz:41-54Hz 60Hz:51-64Hz | ||||||||||
| AC Output | |||||||||||
| Phase & waveform | Single phase & Pure Sine Wave (bypass mode sync to input) | ||||||||||
| Voltage | 110/120/130VAC or 220/230/240VAC±10%rms (bypass mode sync to input) | ||||||||||
| Frequency | 50Hz±0.3Hz 60Hz±0.3Hz (bypass mode sync to input) | ||||||||||
| Peak Power | 3 times of rating power | ||||||||||
| Short Circuit Protection |
Yes, shutdown after 10ms | ||||||||||
| Power Factor | 0.9-1.0 | ||||||||||
| DC Input | |||||||||||
| Battery Voltage | 12VDC or 24VDC or 48VDC | ||||||||||
| Minimum Start Voltage |
10VDC or 20VDC or 40VDC | ||||||||||
| Low Battery Alarm | 10.5±0.3vdc or 21±0.6vdc or 42±1.2vdc | ||||||||||
| Low DC input Shut-down |
10±0.3vdc or 20±0.6vdc or 40±1.2vdc | ||||||||||
| High DC input Alarm & Fault | 16±0.3vdc or 32±0.6vdc or 64±1.2vdc | ||||||||||
| High DC input Recovery |
15.5±0.3vdc or 31±0.6vdc or 62±1.2vdc | ||||||||||
| MAX Charger Current |
20A/35A/ 50A/75A/90A(According to the Inverter model) | ||||||||||
| System parameter | |||||||||||
| Battery Mode Efficiency |
>85% | ||||||||||
| Line Mode Efficiency |
>96% | ||||||||||
| Power Saver | Load <=25W (Enabled on "P/S auto" setting of Remote control) | ||||||||||
| Audible Alarm | Sounding when the heat sink's tem is over 100ºC and shutdown after 30 seconds. | ||||||||||
| Over Load Protection |
110% <load<150%, beeps 0.5s every 1s, and Fault after 60s. Load>150%, beeps 0.5s every 1s, and Fault after 20s. |
||||||||||
| Protections | low battery,over charging,over temp,over load | ||||||||||
| Communications | RS-232/USB/SNMP(custom-made) | ||||||||||
| Operating Environment | 0-40ºC,0-90%RH(non-condensing) | ||||||||||
| Audible Noise | <60dB | ||||||||||
| Net Weight(KG) | 16kg | 18kg | 20kg | 25kg | 39kg | 42kg | 49kg | ||||
| Dimension L X W X H | 470 X223 X185mm | 650 X223 X185mm |
|||||||||
Main Features:
1.LED/LCD digital display show voltage, load and battery info in real time.
2.Peak power is three times of rated power.
3.Can work with inductive load such as air conditioner, motor door and so on.
4.Pure sine wave output, available for sensitive load.
5.4-step progressive charging, 7 battery type selector.
6.Fast and powerful charger with 35A and 75A/90A.
7.Accept generator's energy output.
8.High power factor 0.9, low power consumption.
9.Automatically transfer between battery and line modes.
10.Microprocessor control guarantees high reliability.
11.Bypass without battery connected.
12.Remote control function.
13.Protection against: Over load, over temperature, over charging, low battery
14.Reverse connection (optional by hard connector), Blackouts
Our products are sold all over the world, you can rest assured.
